How to solve the problem of uneven lighting of LED strips

How to solve the problem of uneven lighting of LED strips

LED light strips are common in life lighting, and can be seen everywhere in large shopping malls, restaurants, and hotels. Indoors, it can be said that most home lighting will use LED light strips. On the one hand, it is an indirect lighting method, and on the other hand, it is a To a very good decorative effect, to create an ambient atmosphere. However, we can find that the LED lights sometimes emit uneven and dim light. How to solve it?

The LED light strip is mainly installed in the light trough to create a large area of luminous ceilings and walls, and to shape the effect of wall washing. It is precisely because of its large lighting range that once a problem occurs, it will affect a wide range of light and shadow effects. When we choose LED light strips, we must keep our eyes open and choose carefully.

Good quality LED lamp beads, the brightness between the lamp beads and the lamp beads is consistent, the light is uniform, and the brightness of the head and tail of the light strip should be the same. The light color of the light strip should also be the same. Use white paper to stick to the light-emitting surface of the light strip and observe it directly with the eyes. In order to have a uniform luminous effect, it is necessary to choose good color rendering when purchasing. The color rendering index Ra>80 is the requirement that a professional LED light strip must meet. This is also the requirement of the national standard GB50034-2013.

Incorrect installation of the light strip will also affect the lighting effect.

If the wall is not evenly painted, the light will be uneven, and we can use the installation frame to solve this problem. The light-emitting angle of LED light strips is usually only 120°, and some light troughs are too high for us to see the light produced by LED light strips. In this regard, you can raise the LED light strip to keep the distance between the light strip and the upper edge of the light trough at about 4-125px, or stick the light strip on the side wall.

If the light strip is too long and the brightness of the tail is not enough, you can use a higher power constant voltage driver. For example, a 6-meter light strip uses a 4A electrical appliance to ensure that the electrical appliance has enough margin without causing waste; you can also change the lamp. The connection method of the belt can solve the problem that the tail does not light up.

The light strip can also be done differently, and it can also be so enchanting. The suggested layout of the light strips is first made on the wall, and then covered with hollow wooden boards, so that the light can be projected through the patterns on the wooden boards.

On the side wall of the aisle, three narrow and long equal-scale light troughs were dug out, with built-in light strips, which showed such an interior decoration effect after Z, which changed the original monotonous white wall. Of course, its own lighting function is also very practical. Light up small areas without taking up space.